Honda/Acura Engine Block Venting
Crankcase Venting Block venting is a topic that’s been well covered and doesn’t need further explanation by me. If you want to read a great write-up about venting, check out…
Musings of a Gear Head
Crankcase Venting Block venting is a topic that’s been well covered and doesn’t need further explanation by me. If you want to read a great write-up about venting, check out…
Why is this important? It really isn’t…I just thought I would share the idea. While I was working on the upgrades that I outlined in “Project Civic – Letting it…
Justification Following the 2016 refresh and having addressed all of the stumbling blocks I encountered, I realized that I needed to develop a long term plan based on how I…
Once upon a time, circa 2000, I set out to do what would be the biggest automotive project I had done to date. I swapped the engine in my Civic…
(This write-up was originally written and published in 2006) After a long weekend at Putnam Park Raceway in Indiana, I realized that my hatch needed a far more aggressive suspension.…
Upgrading the sway bars, or simply installing sway bars is a very cost effective way to drastically improve the handing of any car. I’ve outlined the installation of Eibach’s sway…
One thing that always bothered me about my ’07 Civic Si was the fact that it was almost impossible to shift quickly at redline without grinding or missing gears. To…
This story starts out with a little garage mishap by a close friend of mine. As with most projects, one thing leads to another and a fully built engine emerges…or…
When I managed to destroy another engine, through a rather embarrassing water compression experiment that failed, I needed another one. The shop that I had used for years for swaps…
Aesthetics aside, swapping the steering wheel removes a great deal of mass that tends to numb steering feel. Back in the day, steering wheels tended to be over-sized and housed…
This write-up should work for a wide range of Hondas and Acuras. Why would we need to upgrade the pump? In the case of the older cars, you may just…
From The Beginning Writing a project introduction roughly twelve years after starting the project can be challenging. Recounting all of the details is dependent on how well I documented my…
Saving a few bucks on a performance upgrade is always a great idea as long as you aren’t buying cheap knock-offs or impacting safety or reliability. I managed to stumble…
One of the easier modifications you can do is install a short shifter. It is easily one of the single most obvious upgrades in that you’ll be using the shifter…
In my special tools section, I included a factory Honda tool that is used for adjusting valve lash. In this page, I’ll describe the use of the tool as well…
You can save a great deal of money if you can take care of your brakes on your own. Honestly, there isn’t much to it. Personally, I prefer to change…
Comparing ACT, Exedy, Clutchmasters, and OEM Clutches Over the past decade and change, I’ve had a chance to experience a few different clutches and I wanted to share my thoughts…